Router, R-1 will be configured to allow SNMP management coming from IP 192.168.14.132 - this is the SNMP management server (not shown in lab).
The story for the commands below begins with allowing traffic from the SNMP management server. Then, group, evoolcorp is created for SNMP version 3 to allow read and write permissions. Next, user, admin is created into the evoolcorp group to authenticate using sha encryption, and privilege of aes 256 bit encrypiton with acl 1 applied. Show snmp is also shown to give a detail of what's going on with snmp such as bad packets. Lastly, these configurations are saved.
configure terminal
access-list 1 permit host 192.168.14.132
snmp-server group evoolcorp v3 priv read write
snmp-server user admin evoolcorp v3 auth sha toor priv aes 256 toor acc 1
end
show snmp
write
No comments:
Post a Comment